Standard No. | Title | Corresponding International Standard | Applicable Model |
---|
ISO 362: 1998 | Measurement of noise emitted by accelerating road vehicles -- Engineering method | JIS D 1024 | |
ISO 3740: 2000 | Determination of sound power levels of noise sources -- Guidelines for the use of basic standards | | |
ISO 3741: 1999 | Determination of sound power levels of noise sources using sound pressure -- Precision methods for reverberation rooms | JIS Z 8734 | AS-30PA5,AS-31PA5 |
ISO 3743-1: 1994 | Determination of sound power levels of noise sources -- Engineering methods for small, movable sources in reverberant fields -- Part 1: Comparison method for hard-walled test rooms | JIS Z 8734 | |
ISO 3743-2: 1994 | Determination of sound power levels of noise sources using sound pressure -- Engineering methods for small, movable sources in reverberant fields -- Part 2: Methods for special reverberation test rooms | JIS Z 8734 | |
ISO 3744: 1994 | Determination of sound power levels of noise sources using sound pressure -- Engineering method in an essentially free field over a reflecting plane | JIS Z 8733 | |
ISO 3745: 2003 | Determination of sound power levels of noise sources using sound pressure -- Precision methods for anechoic and hemi-anechoic rooms | JIS Z 8732 | AS-30PA5 |
ISO 3746: 1995 | Determination of sound power levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane | JIS Z 8733 | |
ISO 3747: 2000 | Determination of sound power levels of noise sources using sound pressure -- Comparison method in situ | JIS Z 8733 | |
ISO 3822-2 :1995 | Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves | JIS A 1424-2 | |
ISO 4871: 1996 | Declaration and verification of noise emission values of machinery and equipment | | |
ISO 4872: 1978 | Measurement of airborne noise emitted by construction equipment intended for outdoor use -- Method for determining compliance with noise limits | JIS A 8305 | CAT-SA02-CPWL |
ISO 717-2: 1996 | Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation | JIS A 1419-2 | NX-28BA,AS-20PE5 |
ISO 7182: 1984 | Measurement at the operator's position of airborne noise emitted by chain saws | | |
ISO 7196: 1995 | Frequency-weighting characteristic for infrasound measurements | | |
ISO 7574-1: 1985 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 1: General considerations and definitions | | |
ISO 7574-2: 1985 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 2: Methods for stated values for individual machines | | |
ISO 7574-3: 1985 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 3: Simple(transition) method for stated values for batches of machines | | |
ISO 7574-4: 1985 | Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 4: Methods for stated values for batches of machines | | |
ISO 7779: 1999 | Measurement of airborne noise emitted by information technology and telecommunications equipment | JIS X 7779 | |
ISO 8579-1: 2002 | Acceptance code for gear units -- Part 1: Test code for airborne sound | JIS B 1753 | |
ISO 8579-2: 1993 | Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing | JIS B 1754 | |
ISO 9295: 1988 | Measurement of high-frequency noise emitted by computer and business equipment | JIS X 7779 | |
ISO 9296: 1988 | Declared noise emission values of computer and business equipment | JIS X 7778 | |
ISO 9612: 1997 | Guidelines for the measurement and assessment of exposure to noise in a working environment | | |
ISO 9613-1: 1993 | Attenuation of sound during propagation outdoors -- Part 1: Calculation of the absorption of sound by the atmosphere | JIS Z 8738 | |
ISO 9613-2: 1996 | Attenuation of sound during propagation outdoors -- Part 2: General method of calculation | | |
ISO 9614-1: 1993 | Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points | JIS Z 8736-1 | |
ISO 9614-2: 1996 | Determination of sound power levels of noise sources using sound intensity -- Part 2: Measurement by scanning | JIS Z 8736-2 | |
ISO 9614-3 :2002 | Determination of sound power levels of noise sources using sound intensity -- Part 3: Precision method for measurement by scanning | JIS Z 8736-3 | |
ISO 5130: 2019 | Acoustics -- Measurements of sound pressure level emitted by stationary road vehicles | JIS D 1026 | |
ISO 5131: 1996 | Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method | | |
ISO 532: 1975 | Method for calculating loudness level | | |
ISO 6393: 2008 | Earth-moving machinery -- Determination of sound power level -- Stationary test conditions | | CAT-SA02-CPWL |
ISO 6394: 2008 | Earth-moving machinery -- Determination of emission sound pressure level at operator's position -- Stationary test conditions | | |
ISO 6395 :2008 | Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions | JIS A 8317-1 | |
ISO 6396: 2008 | Earth-moving machinery -- Determination of emission sound pressure level at operator's position -- Dynamic test conditions | | |
ISO 6798: 1995 | Reciprocating internal combustion engines -- Measurement of emitted airborne noise -- Engineering method and survey method | JIS B 8005 | |
ISO 6926: 1999 | Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | | |
ISO 10534-1: 1996 | Determination of sound absorption coefficient and impedance in impedance tubes -- Part 1: Method using standing wave ratio | JIS A 1405-1 | Acoustic duct Acoustic measurement systems |
ISO 10534-2: 1998 | Determination of sound absorption coefficient and impedance in impedance tubes -- Part 2: Transfer-function method | JIS A 1405-2 | Acoustic duct Acoustic measurement systems |
ISO 10843: 1997 | Methods for the description and physical measurement of single impulses or series of impulses | | |
ISO 10844: 1994 | Specification of test tracks for the purpose of measuring noise emitted by road vehicles | JIS D 8301 | |
ISO 11200: 1995 | Noise emitted by machinery and equipment -- Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | | |
ISO 11201: 1995 | Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Engineering method in an essentially free field over a reflecting plane | JIS Z 8737-1 | |
ISO 11202: 1995 | Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Survey method in situ | JIS Z 8737-2 | |
ISO 11203: 1995 | Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level | | |
ISO 11204: 1995 | Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Method requiring environmental corrections | | |
ISO 11205 :2003 | Noise emitted by machinery and equipment -- Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity | | |
ISO 12001: 1996 | Noise emitted by machinery and equipment -- Rules for the drafting and presentation of a noise test code | | |
ISO 140-1: 1997 | Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratory test facilities with suppressed flanking transmission | JIS A 1416 | AS-20PE5 |
ISO 140-10: 1991 | Measurement of sound insulation in buildings and of building elements -- Part 10: Laboratory measurement of airborne sound insulation of small building elements | JIS A 1428 | |
ISO 140-11 :2005 | Measurement of sound insulation in buildings and of building elements -- Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors | | |
ISO 140-14 :2004 | Measurement of sound insulation in buildings and of building elements -- Part 14: Guidelines for special situations in the field | | |
ISO 140-16: 2006 | Measurement of sound insulation in buildings and of building elements -- Part 16: Laboratory measurement of the sound reduction index improvement by additional lining | | |
ISO 3822-1: 1999 | Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement | JIS A 1424-1 | |
ISO 140-18: 2006 | Measurement of sound insulation in buildings and of building elements -- Part 18: Laboratory measurement of sound generated by rainfall on building elements | | |
ISO 140-2: 1991 | Measurement of sound insulation in buildings and of building elements -- Part 2: Determination, verification and application of precision data | | |
ISO 140-3: 1995 | Measurement of sound insulation in buildings and of building elements -- Part 3: Laboratory measurements of airborne sound insulation of building elements | JIS A 1416 | AS-20PE5 |
ISO 140-4: 1998 | Measurement of sound insulation in buildings and of building elements -- Part 4: Field measurements of airborne sound insulation between rooms | JIS A 1417 | NX-28BA,AS-20PE5 |
ISO 140-5: 1998 | Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of facade elements and facades | | NX-28BA,AS-20PE5 |
ISO 140-6: 1998 | Measurement of sound insulation in buildings and of building elements -- Part 6: Laboratory measurements of impact sound insulation of floors | | |
ISO 140-7: 1998 | Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors | JIS A 1418-1 | NX-28BA,AS-20PE5,FI-01A |
ISO 140-8: 1997 | Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor | JIS A 1440-1 JIS A 1440-2 | AS-20PE5 |
ISO 15186-1: 2000 | Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1:Laboratory measurements | | |
ISO 15186-2: 2003 | Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1: Field measurements | | |
ISO 15186-3: 2002 | Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 3: Laboratory measurements at low frequencies | | |
ISO 1680: 1999 | Test code for the measurement of airborne noise emitted by rotating electrical machines | | |
ISO 1683: 1983 | Preferred reference quantities for acoustic levels | | |
ISO 1996-1: 2003 | Description, measurement and assessment of environmental noise -- Part 1: Basic quantities and assessment procedures | JIS Z 8731 | |
ISO 1996-2: 2007 | Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels | JIS Z 8731 | NX-28FT |
ISO 1999: 1990 | Determination of occupational noise exposure and estimation of noise-induced hearing impairment | | |
ISO 26101 : 2017 | Acoustics -- Test methods for the qualification of free-field environments | | |
ISO 226: 2003 | Normal equal-loudness level contours | | |
ISO 266: 1997 | Preferred frequencies | | |
ISO 2922: 2000 | Measurement of airborne sound emitted by vessels on inland waterways and harbours | | |
ISO 2923: 1996 | Measurement of noise on board vessels | | |
ISO 3382: 1997 | Measurement of the reverberation time of rooms with reference to other acoustical parameters | | |
ISO 354: 2003 | Measurement of sound absorption in a reverberation room | JIS A 1409 | AS-20PE5 |
ISO 717-1: 1996 | Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation | JIS A 1419-1 | NX-28BA,AS-20PE5 |
Standard No. | Title | Corresponding International Standard | Applicable Model |
---|
ISO 8042: 1988 | Shock and vibration measurements -- Characteristics to be specified for seismic pick-ups | JIS B 0909 | |
ISO 7919-1: 1996 | Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines | JIS B 0910 | |
ISO 18738-2: 2012 | Measurement of ride quality -- Part 2: Escalators and moving walks | | |
ISO 5344: 2004 | Electrodynamic vibration generating systems -- Performance characteristics | | |
ISO 5348: 1998 | Mechanical vibration and shock -- Mechanical mounting of accelerometers | | |
ISO 5349-1: 2001 | Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 1: General requirements | JIS B 7761-3 | VX-54WH |
ISO 5349-2: 2001 | Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 2: Practical guidance for measurement at the workplace | JIS B 7761-2 | VX-54WH,CAT-SA02-HT |
ISO 5805: 1997 | Mechanical vibration and shock -- Human exposure -- Vocabulary | JIS Z 8131 | |
ISO 5982: 2001 | Mechanical vibration and shock -- Range of idealized values to characterize seated-body biodynamic response under vertical vibration | | |
ISO 6487: 2002 | Road vehicles -- Measurement techniques in impact tests -- Instrumentation | | |
ISO 6954: 2000 | Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships | JIS F 0907 | VX-54WS |
ISO 8041: 2005 | Human response to vibration -- Measuring instrumentation | JIS B 7760 JIS B 7761-1 | VX-54WB,VX-54WH,CAT-SA02-HT |
ISO 7096: 2000 | Earth-moving machinery -- Laboratory evaluation of operator seat vibration | JIS A 8304 | |
ISO 10068: 1998 | Mechanical vibration and shock -- Free, mechanical impedance of the human hand-arm system at the driving point | | |
ISO 10112: 1991 | Damping materials -- Graphical presentation of the complex modulus | | |
ISO 10814: 1996 | Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance | JIS B 0911 | |
ISO 10816-1: 1995 | Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines | JIS B 0906 JIS F 0906 | |
ISO 20816-1:2016 | Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 1: General guidelines | | |
ISO 4868: 1984 | Code for the measurement and reporting of local vibration data of ship structures and equipment | | |
ISO 4867: 1984 | Code for the measurement and reporting of shipboard vibration data | | |
ISO 10819: 1996 | Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | JIS T 8114 | |
ISO 13090-1: 1998 | Mechanical vibration and shock -- Guidance on safety aspects of tests and experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated shock | | |
ISO 13091-1: 2001 | Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 1: Methods of measurement at the fingertips | | |
ISO 13091-2: 2003 | Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 2:Analysis and interpretation of measurement at the fingertips | | |
ISO 16063-1: 1998 | Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts | | |
ISO 16063-11: 1999 | Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry | | |
ISO 16063-12: 2002 | Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method | | |
ISO 16063-13: 2001 | Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry | | |
ISO 16063-15: 2006 | Methods for the calibration of vibration and shock transducers -- Part 15: Primary angular vibration calibration by laser interferometry | | |
ISO 16063-21: 2003 | Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison to a reference transducer | | |
ISO 16063-22: 2005 | Methods for the calibration of vibration and shock transducers -- Part 22: Shock calibration by comparison to a reference transducer | | |
ISO 16063-31: 2009 | Methods for the calibration of vibration and shock transducers -- Part 31: Testing of transverse vibration sensitivity | | |
ISO 16063-44: 2018 | Methods for the calibration of vibration and shock transducers -- Part 44: Calibration of field vibration calibrators | | |
ISO 18431-1: 2005 | Mechanical vibration and shock -- Signal processing -- Part 1: General introduction | | |
ISO 18431-2: 2004 | Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis | | |
ISO 18431-4: 2007 | Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis | | |
ISO 1925: 2001 | Mechanical vibration -- Balancing -- Vocabulary | | |
ISO 2041: 1990 | Vibration and shock -- Vocabulary | JIS B 0153 | |
ISO 2631-1 :1997 | Evaluation of human exposure to whole-body vibration -- Part 1: General requirements | JIS B 7760-2 | VX-54WB,CAT-SA02-HT |
ISO 2631-2: 2003 | Evaluation of human exposure to whole-body vibration -- Part 2: Continuous and shock-induced vibrations in buildings(1 to 80 Hz) | | |
ISO 2631-4: 2001 | Evaluation of human exposure to whole-body vibration -- Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems | | |
ISO 2631-5: 2004 | Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of vibration containing multiple shocks | | |
ISO 2954: 1975 | Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity | JIS B 0907 | VM-82A,UV-16 (Compliant with frequency response correction filters) |
ISO 3046-5 :2001 | Reciprocating internal combustion engines -- Performance -- Part 5: Torsional vibrations | JIS B 8002-5 | |
ISO 7626-1: 1986 | Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers | | |
ISO 7626-2: 1990 | Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter | | |
ISO 7626-5 :1994 | Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure | | |
ISO 18738-1: 2012 | Measurement of ride quality -- Part 1: Lifts (elevators) | | |