Software

Contents

1.Outline

The following subjects are improved and upgraded.
●RIONOTE System utility
GUI, Batch data input, Calibration data store and import, Wireless and LAN connection, Wireless function of the setting application
●SX-A1WR
Data store to SA-A1B2/B4, Data download from SA-A1B2/B4, Processing corresponding to the state abnormality error
●SX-A1FT
Correspondence to the wireless function of RIONOTE, GUI, Batch data input, Calibration data store and import
●SX-A1RT
Correspondence to the wireless function of RIONOTE, GUI, Batch data input, Calibration data store and import
●SA-A1B2/B4
GUI, Batch data input, Calibration data store and import, Wireless and LAN connection, Wireless function of the setting application

Version number:Version 2.0
Release date:February 13th, 2017

2.Download and Installation

You will need:

・ SA-A1 unit attached amplifier unit SA-A1B4 or B2.
・ AC adaptor and also fully charged battery (with three battery power gauge displayed. ).
・ SD card
(Note: use a Rion approved SD memory card to guarantee performance.
For example: SX-A1RT and SX-A1FT
・ Downloaded firmware Version 2.0 (Updated firmware)

1. Unzip the downloaded file "SA-A1_Firmware_Ver_2_0.zip".
When you unzip, saa1_system_update_02.00.0002.zip,saa1_utility_update_02.00.0072.zip, saa1_app_ft_v.2.0.zip, saa1_app_rt_v2.0.zip, saa1_app_wr_02.00.0072-signed..zip, saa1_ampunit_update_02.00.0018.zip will be created into the lowest hierarchy.
The folder hierarchy is shown below.
/SA-A1_Firmware_Ver_2_0

2. Copy these files to the SD card (No need make a folder. Copy it to the root directory of the SD card.)

3. Make sure to use AC adapter, and Li-ion battery (Full-charged) for avoiding power shortages. Each upgrading procedure is as follows.

3.1 RIONOTE System utility
Insert the SD card into the RIONOTE and turn the RIONOTE on.
Tap [Program control] on the display.
Next, tap [System], and tap [Check SD card].
“Utility” and “Version 2.0” are shown.
Tap [Install] on the display.
After showing the confirmation message of upgrade, tap [Install].
Do not remove the SD card while installing.
“Under preparations for upgrading” → “Upgrading” are shown.
After completing the upgrade, “Ver.2.0” is shown on the display.

3.2 SX-A1WR, SX-A1RT, SX-A1FT
Insert the SD card into the RIONOTE and turn the RIONOTE on.
Tap [Program control] on the display.
Next, tap [System], and tap [Check SD card].

After showing ”SX-A1RT”, ”SX-A1FT”, ”SX-A1WR”, “Ver. 1.01” on the intall / upgrade space, tap each [Upgrade].

When the confirmation message of upgrade is shown, tap[OK].
Next, when the confirmation message of install, tap [install].
Do not remove the SD card while installing.
“Under preparations for upgrading” → “Upgrading” are shown.
After completing the upgrade, Tap [Finish].

3.3 Amp unit SA-A1B2 and SA-A1B4
Insert the SD card into the RIONOTE and turn the RIONOTE on.
Tap [Amp unit control] on the display.
Next, move the screen to the lower position, tap [Upgrade] and [Done].
After showing the confirmation message of upgrade, tap [OK].
Do not remove the SD card while installing.

4. After completing the upgrade, make sure that System utility, SX-A1FT, SX-A1RT, SX-A1WR, SA-A1B2, SA-A1B4 were upgraded to “Ver.2.0”.
The version can be checked on [Program] of [Program control], and [System] menu.
The version of Amp unit is checked by [Amp unit control].
After completing the upgrade, the "update" file on the SD card will no longer be needed.

3.Software License Agreement

Do not agree
Agree to the above and download