Software |
Outline |
|
Release date:January 14th, 2021
|
|
Released date: March 23rd, 2020 |
|
Release date:February 10th, 2020 |
|
Release date : November 14th, 2019 |
|
Release date : September 5th, 2019 |
|
Release date : September 5th, 2019 |
|
Release date:July 19th, 2019 |
|
Release date:April 2nd, 2019 |
|
Release date:February 12th, 2019 |
|
Release date:February 12th, 2019 |
|
Release date:February 12th, 2019 |
|
Release date: February 12th, 2019 |
|
Release date:January 17th, 2019 |
|
Release date:August 17th, 2018 |
|
Release: November 20th, 2017
|
|
Release date:November 7th, 2017 |
|
Release date:October 27th, 2017 |
|
Release date:October 13th, 2017 |
|
Release date:October 26th, 2017 |
|
Release date:October 26th, 2017 |
|
Release date:August 4th, 2017 |
|
Release date:June 9th, 2017 |
|
Release date:June 9th, 2017 |
|
Release date:June 9th, 2017 |
|
Release date:April 27th, 2017 |
|
Release date:February 13th, 2017 |
|
Release date:April 18th, 2016 |
|
Release date:April 15th, 2016 |
|
Release date:March 25th, 2016 |
|
Release date:January 22th, 2016 |
|
Release date:January 22th, 2016 |
|
Release date:January 22th, 2016 |
|
Release date:February 2nd, 2015 |
|
Release date:February 2nd, 2015 |
|
Release date:December 25th, 2014
|
|
Release date:November 25th, 2014
|
|
Release date:November 25th, 2014 |
|
Release date:December 4th, 2013 |
|
Release date:October 23th, 2013 |
|
Issue corrected by this firmware: If store operations were performed in Timer Auto mode while sleep mode was on, then errors could occur in subsequent files. These files would not then be saved and measurements would cease.
Release date:May 31th, 2012 |